direwolf.h

/* direwolf.h - Common stuff used many places. */

// TODO:   include this file first before anything else in each .c file.


#ifdef NDEBUG
#undef NDEBUG		// Because it would disable assert().
#endif


#ifndef DIREWOLF_H
#define DIREWOLF_H 1

/*
 * Support Windows XP and later.
 *
 * We need this before "#include <ws2tcpip.h>".
 *
 * Don't know what other impact it might have on others.
 */

#if __WIN32__

#ifdef _WIN32_WINNT
#error	Include "direwolf.h" before any windows system files.
#endif
#ifdef WINVER
#error	Include "direwolf.h" before any windows system files.
#endif

#define _WIN32_WINNT 0x0501     /* Minimum OS version is XP. */
#define WINVER       0x0501     /* Minimum OS version is XP. */

#include <winsock2.h>
#include <windows.h>

#endif


/*
 * Previously, we could handle only a single audio device.
 * This meant we could have only two radio channels.
 * In version 1.2, we relax this restriction and allow more audio devices.
 * Three is probably adequate for standard version.
 * Larger reasonable numbers should also be fine.
 *
 * For example, if you wanted to use 4 audio devices at once, change this to 4.
 */

#define MAX_ADEVS 3			

	
/*
 * Maximum number of radio channels.
 * Note that there could be gaps.
 * Suppose audio device 0 was in mono mode and audio device 1 was stereo.
 * The channels available would be:
 *
 *	ADevice 0:	channel 0
 *	ADevice 1:	left = 2, right = 3
 *
 * TODO1.2:  Look for any places that have
 *		for (ch=0; ch<MAX_CHANS; ch++) ...
 * and make sure they handle undefined channels correctly.
 */

#define MAX_CHANS ((MAX_ADEVS) * 2)

/*
 * Maximum number of rigs.
 */

#ifdef USE_HAMLIB
#define MAX_RIGS MAX_CHANS
#endif

/*
 * Get audio device number for given channel.
 * and first channel for given device.
 */

#define ACHAN2ADEV(n) ((n)>>1)
#define ADEVFIRSTCHAN(n) ((n) * 2)

/*
 * Maximum number of modems per channel.
 * I called them "subchannels" (in the code) because 
 * it is short and unambiguous.
 * Nothing magic about the number.  Could be larger
 * but CPU demands might be overwhelming.
 */

#define MAX_SUBCHANS 9

/*
 * Each one of these can have multiple slicers, at
 * different levels, to compensate for different
 * amplitudes of the AFSK tones.
 * Intially used same number as subchannels but
 * we could probably trim this down a little
 * without impacting performance.
 */

#define MAX_SLICERS 9


#if __WIN32__
#define SLEEP_SEC(n) Sleep((n)*1000)
#define SLEEP_MS(n) Sleep(n)
#else
#define SLEEP_SEC(n) sleep(n)
#define SLEEP_MS(n) usleep((n)*1000)
#endif


#if __WIN32__

#define PTW32_STATIC_LIB
//#include "pthreads/pthread.h"

// This enables definitions of localtime_r and gmtime_r in system time.h.
//#define _POSIX_THREAD_SAFE_FUNCTIONS 1
#define _POSIX_C_SOURCE 1

#else
#include <pthread.h>
#endif


#ifdef __APPLE__

// https://groups.yahoo.com/neo/groups/direwolf_packet/conversations/messages/2072

// The original suggestion was to add this to only ptt.c.
// I thought it would make sense to put it here, so it will apply to all files,
// consistently, rather than only one file ptt.c.

// The placement of this is critical.  Putting it earlier was a problem.
// https://github.com/wb2osz/direwolf/issues/113

// It needs to be after the include pthread.h because
// pthread.h pulls in <sys/cdefs.h>, which redefines __DARWIN_C_LEVEL back to ansi,
// which breaks things.
// Maybe it should just go in ptt.c as originally suggested.

// #define __DARWIN_C_LEVEL  __DARWIN_C_FULL

// There is a more involved patch here:
//  https://groups.yahoo.com/neo/groups/direwolf_packet/conversations/messages/2458

#ifndef _DARWIN_C_SOURCE
#define _DARWIN_C_SOURCE
#endif

// Defining _DARWIN_C_SOURCE ensures that the definition for the cfmakeraw function (or similar)
// are pulled in through the include file <sys/termios.h>.

#ifdef __DARWIN_C_LEVEL
#undef __DARWIN_C_LEVEL
#endif

#define __DARWIN_C_LEVEL  __DARWIN_C_FULL

#endif


/* Not sure where to put these. */

/* Prefix with DW_ because /usr/include/gps.h uses a couple of these names. */

#ifndef G_UNKNOWN
#include "latlong.h"
#endif


#define DW_METERS_TO_FEET(x) ((x) == G_UNKNOWN ? G_UNKNOWN : (x) * 3.2808399)
#define DW_FEET_TO_METERS(x) ((x) == G_UNKNOWN ? G_UNKNOWN : (x) * 0.3048)
#define DW_KM_TO_MILES(x) ((x) == G_UNKNOWN ? G_UNKNOWN : (x) * 0.621371192)

#define DW_KNOTS_TO_MPH(x) ((x) == G_UNKNOWN ? G_UNKNOWN : (x) * 1.15077945)
#define DW_KNOTS_TO_METERS_PER_SEC(x) ((x) == G_UNKNOWN ? G_UNKNOWN : (x) * 0.51444444444)
#define DW_MPH_TO_KNOTS(x) ((x) == G_UNKNOWN ? G_UNKNOWN : (x) * 0.868976)
#define DW_MPH_TO_METERS_PER_SEC(x) ((x) == G_UNKNOWN ? G_UNKNOWN : (x) * 0.44704)

#define DW_MBAR_TO_INHG(x) ((x) == G_UNKNOWN ? G_UNKNOWN : (x) * 0.0295333727)




#if __WIN32__

typedef CRITICAL_SECTION dw_mutex_t;

#define dw_mutex_init(x) \
	InitializeCriticalSection (x)

/* This one waits for lock. */

#define dw_mutex_lock(x) \
	EnterCriticalSection (x) 

/* Returns non-zero if lock was obtained. */

#define dw_mutex_try_lock(x) \
	TryEnterCriticalSection (x)

#define dw_mutex_unlock(x) \
	LeaveCriticalSection (x)


#else

typedef pthread_mutex_t dw_mutex_t;

#define dw_mutex_init(x) pthread_mutex_init (x, NULL)

/* this one will wait. */

#define dw_mutex_lock(x) \
	{	\
	  int err; \
	  err = pthread_mutex_lock (x); \
	  if (err != 0) { \
	    text_color_set(DW_COLOR_ERROR); \
	    dw_printf ("INTERNAL ERROR %s %d pthread_mutex_lock returned %d", __FILE__, __LINE__, err); \
	    exit (1); \
	  } \
	}

/* This one returns true if lock successful, false if not. */
/* pthread_mutex_trylock returns 0 for success. */

#define dw_mutex_try_lock(x) \
	({	\
	  int err; \
	  err = pthread_mutex_trylock (x); \
	  if (err != 0 && err != EBUSY) { \
	    text_color_set(DW_COLOR_ERROR); \
	    dw_printf ("INTERNAL ERROR %s %d pthread_mutex_trylock returned %d", __FILE__, __LINE__, err); \
	    exit (1); \
	  } ; \
	  ! err; \
	})

#define dw_mutex_unlock(x) \
	{	\
	  int err; \
	  err = pthread_mutex_unlock (x); \
	  if (err != 0) { \
	    text_color_set(DW_COLOR_ERROR); \
	    dw_printf ("INTERNAL ERROR %s %d pthread_mutex_unlock returned %d", __FILE__, __LINE__, err); \
	    exit (1); \
	  } \
	}

#endif



// Formerly used write/read on Linux, for some forgotten reason,
// but always using send/recv makes more sense.
// Need option to prevent a SIGPIPE signal on Linux.  (added for 1.5 beta 2)

#if __WIN32__ || __APPLE__
#define SOCK_SEND(s,data,size) send(s,data,size,0)
#else
#define SOCK_SEND(s,data,size) send(s,data,size, MSG_NOSIGNAL)
#endif
#define SOCK_RECV(s,data,size) recv(s,data,size,0)


/* Platform differences for string functions. */



#if __WIN32__
char *strsep(char **stringp, const char *delim);
char *strtok_r(char *str, const char *delim, char **saveptr);
#endif

// Don't recall why for everyone.
char *strcasestr(const char *S, const char *FIND);


#if defined(__OpenBSD__) || defined(__FreeBSD__) || defined(__APPLE__)

// strlcpy and strlcat should be in string.h and the C library.

#else   // Use our own copy


// These prevent /usr/include/gps.h from providing its own definition.
#define HAVE_STRLCAT 1
#define HAVE_STRLCPY 1


#define DEBUG_STRL 1

#if DEBUG_STRL

#define strlcpy(dst,src,siz) strlcpy_debug(dst,src,siz,__FILE__,__func__,__LINE__)
#define strlcat(dst,src,siz) strlcat_debug(dst,src,siz,__FILE__,__func__,__LINE__)

size_t strlcpy_debug(char *__restrict__ dst, const char *__restrict__ src, size_t siz, const char *file, const char *func, int line);
size_t strlcat_debug(char *__restrict__ dst, const char *__restrict__ src, size_t siz, const char *file, const char *func, int line);

#else

#define strlcpy(dst,src,siz) strlcpy_debug(dst,src,siz)
#define strlcat(dst,src,siz) strlcat_debug(dst,src,siz)

size_t strlcpy_debug(char *__restrict__ dst, const char *__restrict__ src, size_t siz);
size_t strlcat_debug(char *__restrict__ dst, const char *__restrict__ src, size_t siz);

#endif  /* DEBUG_STRL */

#endif	/* BSD or Apple */


#endif   /* ifndef DIREWOLF_H */