EASYDIGI PTT issue

[lmcycles]

I've tried to search for a resolution, but all my searches result in other with same issue.

I have a Easy Digit built and connected to my Yeasu FT-212RH and in direwolf when I un-comment the PTT /dev/ttyUSB0 and start Direwolf the radio immediately keys up and starts transmitting.

What am I missing here?

Regards,
KE0LFX

[dranch]

Github's "issue" area is not for support.. it's for reporting bugs or feature enhancements. I recommend to join direwolf_packet@yahoogroups.com to get support. Until then, I would suspect either you're using the wrong pin on your RS232 serial adapter or you have the wrong logic configured in your direwolf.conf.

--David
KI6ZHD

[dranch]

Ps. Please close this issue once you have your issued resolved via help from the Yahoo group. :-)

[lmcycles]

My apologies David, I will move the message over to the Yahoo Group.... Thanks. Regards, Jeremy

…

On Wed, Nov 22, 2017 at 12:18 PM, David Ranch ***@***.***> wrote: Github's "issue" area is not for support.. it's for reporting bugs or feature enhancements. I recommend to join ***@***.*** to get support. Until then, I would suspect either you're using the wrong pin on your RS232 serial adapter or you have the wrong logic configured in your direwolf.conf. --David KI6ZHD — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#122 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/APhO2HU0ZOUGOcc7EF1RTQHmQdgW3Mbjks5s5GVhgaJpZM4Qn0BX> .